Accessories

Accessories such as remote monitoring devices or system displays are available from us for all our products we supply in the solar sector be it SMA, Victron, Fronius or Phocos.

Accessories Enquiry form

Need more information on Accessories? Contact us via the form below, and we will get back to you as soon as possible.

First name

Last name

Email Address

Telephone Number

Your Message

Products in Accessories

Battery Monitor

Colour Control GX

Data Manager

Energy Meter

Brands in Accessories

Other categories in Solar

PV Modules

PV modules are the heart of any solar electric system. They convert the visible sunlight into electrical energy.

Inverter converter DC energy obtained from PV modules or batteries into AC energy that normal household equipment uses. High efficiency inverters are a must to efficiently convert the limited available energy form DC to AC.

Batteries

Batteries are used to store energy for night time usage. Different battery technologies are available on the market with a large variety of application. Lithium is one of these technologies which is rapidly expanding the footprint worldwide.

Solar Home Systems

Pre-assembled solar home systems for every day use

Accessories such as remote monitoring devices or system displays are available from us for all our products we supply in the solar sector be it SMA, Victron, Fronius or Phocos.

Laundry

Weather

Boilers

Measurement

Medical

Our Brands | See all Brands

Our Projects | See all Projects

Oranjemund Airport - Supply, Install and Commission of an Aviation Weather Monitoring System

DeBeers Marine Namibia

2015

DeBeers Namibia published a tender for the supply and installation of a weather monitoring system at the Oranjemund Airport. CTS was awarded the tender based on price, knowledge of the meteorological measuring equipment as well as quality of products. At time of installation the station was the most advanced aviation weather station in Namibia.

Technical Details of the system installed:

Ceilometer at end of runway 20 to measure cloud height at three levels up to 7,500m
Runway Visibility and Present Weather sensor at stop end of runway 20.
Present weather sensor monitors 7 different types of precipitation
visibility sensor takes background luminescence into account
Wind speed and direction a touchdown runway 20.
Wind speed and direction, rain as well as barometric pressure at stop end runway 20
AviMet server for processing of all data
3 workstations spread along the buildings for weather monitoring and supervision purposes
ATIS voice system transmitting on aviation frequency as well as telephone dial in the current weather conditions

All communication between the equipment and the AviMet server is based on wireless transmission to reduce cabling costs.

The weather information can be picked up rough 100 NM away from the airport by all approaching aircraft.

Installation of 5 Automatic Weather Stations in Botswana with Satellite Communication

University of Hamburg

2015

Based on our excellent service and knowledge we have rendered to the Botswana Meteorological Department as well as University of Hamburg, CTS was able to secure the 2nd Phase of the manufacture, supply and installation of automatic weather stations in Botswana.

The stations supplied to make use of satellite communication due to the extreme remoteness of the sites, these were:

Mababe (Savuti Marsh)
Tubu (Okavango)
Baines Drift (Eastern Botswana)
Xade (Central Kalahari Game Park)
Ngwaltle (Western Botswana)

These stations are not located at any Meteorological Department property, thus fences had to be erected for protection against animals.

Station design is based on our well proven tripod mast with all relevant sensors and a CR1000 logger as the processing unit. Data is transmitted at fixed timeslots allocated by EUMETSAT (Germany) on an hourly basis. Satellite transmission is based on a fire and forget principle, thus no remote maintenance can be done.

Weather data can be found at: http://www.sasscalweathernet.org .

17kW Grid Tied Photovoltaic System

Stier Vente Chartered Accountant

2017

In early 2017 Stier Vente Chartered Accountant did take the decision to move to renewable energy. A 17kW grid feed system was installed on the roof of the office building to reduce the monthly electricity bill.

A total of 67 260W PV modules and a SMA SunnyTripower 17kW inverter was installed. Remote monitoring allows CTS to advise the client on possible faults and recommended actions to be taken.

Supply, Delivery and Installation of 2 Autoclaves and an Effluent Treatment System for Central Veterinary Laboratories

Ministry of Agriculture

2015

CTS ensures that your system is designed for your requirements. With our years of experience, we not only install, but also service and maintain the equipment today, and in the years to come.

With our extensive knowledge in sterilization and infection control, CTS installed suitable autoclaves with BSL3 seals. In addition to the autoclaves, an effluent treatment system was also installed. This system collects the effluent from the autoclaves, sinks and wash basins, and collects it in one tank. Once a certain level has been reached, a second tank will collect the effluent, while sterilization begins in the first tank. In this way, collection of the effluent is not delayed whilst sterilization is being performed in one of the tanks. Through this system, the highest level of decontamination is achieved, ensuring a safe environment.

CVL is classified as a BSL 3 laboratory. BSL 3 means a biosafety level of 3. This is a level of bio-containment precautions, required to isolate dangerous agents, which may cause serious diseases. This includes various bacteria, viruses and parasites. CVL required autoclaves with a BSL3 seal approval, as well as an effluent treatment system, to decontaminate a wide range of aqueous liquids.

CTS was awarded the tender to supply, deliver to site, installation, testing and commission of two autoclaves and an effluent treatment system for CVL.

Installation of 26 Autoclaves Country Wide

Ministry of Health and Social Services

2015

CTS was awarded four tenders in 2015, to supply, deliver to site, install, test and commission of autoclaves throughout Namibia.

In addition to the 160L Steri Tech autoclaves, water softeners were installed to increase the life span of each unit and reduce overall maintenance cost.

A number of installation teams worked hard to complete the project within the stringent timeframe set by the client. Each site came with its own challenges such as:

Removing of existing units that were beyond repair
Low supply water pressure
Space limitations where the new units were to be installed
Breaking out of walls to fit new autoclave

Accessories Enquiry form

Products in Accessories

Battery Monitor

Colour Control GX

Data Manager

Energy Meter

Brands in Accessories

Victron Energy

SMA

Other categories in Solar

PV Modules

Inverter

Batteries

Solar Home Systems

Accessories

Side Pannel