Gaskets and Insulation

Gaskets are used throughout various industrial markets and Teadit® is recognized as a world leader in the development and manufacturing of innovative fluid sealing products. CTS stocks a broad range of sealing products, ensuring that we will meet your demands every time. In addition to gasket material we also do keep stock of various insulation material, be it fiberglass sheeting, preformed fiberglass pipe lagging or PVC pipe insulation. No heating job is complete without insulation products supplied by CTS.

Typical applications are:

Hot water pipe insulation
Fiberglass sheeting for any type of tanks
Gaskets for steam applications

Gaskets and Insulation Enquiry form

Need more information on Gaskets and Insulation? Contact us via the form below, and we will get back to you as soon as possible.

First name

Last name

Email Address

Telephone Number

Your Message

Products in Gaskets and Insulation

Band Fiberglass

Steam and Water Gasket

Brands in Gaskets and Insulation

Other categories in Boilers

Steam & Hot Water Boiler

CTS can provide a wide range of burners, boilers and accessories.

Heat Exchanger

Transferring heat energy from one medium to the next requires high efficiency heat exchangers, be it for pool heating or temperature control in process, we do have an answer.

Insulation is key in reducing energy losses. Propper insulation not only protects against possible bodily harm but also reduce monthly operational costs.

Pumps

Power

Boilers

Automation

Medical

Our Brands | See all Brands

Our Projects | See all Projects

Supply and Installation of a Hot Water Plant at Ongwediva Meat Processing Facitly

Ministry of Agriculture

2020

A modern hot water plant was installed based on heat pump technology. Stiebel Eltron storage tanks as well as heat pumps are supplied that are extremely energy efficient and long life expectancy while at the same time low on maintenance. Further energy savings are achieved as the system is connected to heat recovery units as part of the refrigeration plant.

The challenge of such a system is to guarantee even loading and unloading of the tanks with water to guarantee a uniform temperature distribution in all tanks. This has been achieved by careful piping planing based on the Tichelmann principal.

The system comprises of the following:

6x 1000 L buffer tanks
2x 23kW heat pump units.
various pumps and control unit

Oranjemund Airport - Supply, Install and Commission of an Aviation Weather Monitoring System

DeBeers Marine Namibia

2015

DeBeers Namibia published a tender for the supply and installation of a weather monitoring system at the Oranjemund Airport. CTS was awarded the tender based on price, knowledge of the meteorological measuring equipment as well as quality of products. At time of installation the station was the most advanced aviation weather station in Namibia.

Technical Details of the system installed:

Ceilometer at end of runway 20 to measure cloud height at three levels up to 7,500m
Runway Visibility and Present Weather sensor at stop end of runway 20.
Present weather sensor monitors 7 different types of precipitation
visibility sensor takes background luminescence into account
Wind speed and direction a touchdown runway 20.
Wind speed and direction, rain as well as barometric pressure at stop end runway 20
AviMet server for processing of all data
3 workstations spread along the buildings for weather monitoring and supervision purposes
ATIS voice system transmitting on aviation frequency as well as telephone dial in the current weather conditions

All communication between the equipment and the AviMet server is based on wireless transmission to reduce cabling costs.

The weather information can be picked up rough 100 NM away from the airport by all approaching aircraft.

Pioneerspark Medical Centre

2017

Pionieerspark Medical Centre can call themselves a proud owner of a 38kW photovoltaic grid feed system. Considerable savings on the monthly electricity bill are achieved as most of the electricity requirements are produced directly at the customer. Excess energy is fed back into the grid and credited on the monthly electricity bill by City of Windhoek.

The system consists of 144 265W PV modules mounted flat on the roof of the building with 2 Fronius three phase grid feed inverters and remote monitoring via the Fronius App on the cell phone. Remote monitoring allows CTS to advise the client on possible faults and recommended actions to be taken.

Supply, Delivery and Installation of Laundry Equipment for the Husab Mine

Husab Uranium Mine

2015

CTS was instructed to supply, deliver, install, test and commission laundry equipment for the Mine Complex Change House, Plant Complex Change House and the FPR Change House at the Husab Mine in 2015.

The Husab mine has to process nearly 2 000 overalls and towels on a daily basis. Emphasis was made on equipment that is energy efficient, safe to operate and cost effective to maintain.

Miele equipment fulfills every requirement when it comes to the economical processing of large amounts of laundry. Miele’s tried and tested programs ensure the correct washing process for every type of material. The tumble driers complement the washer extractors and are highly economical, thanks to short running times. Thus you have a perfect solution to process large amounts of laundry, fast, hygienically and economically.

CTS installed washer extractors fitted with water recovery units and heat pump tumble driers. Laundry-care requirements vary significantly according to the customer’s needs. Whichever your requirement, CTS can offer you the ideal solution.

Small off-grid PV Systems

Private

2018

Various small off-grid PV systems, also referred to SHS (Solar Home Systems) have been supplied country wide. These systems are typically based on small high efficiency lithium ion batteries as storage solution and Victron components such as solar charge regulator, inverter and monitoring devices.

Gaskets and Insulation - Boilers - Our Products | Central Technical Supplies